1-800-309-1450

Loving Memorial Urns

ColorBrite

Multi-Color Imprinting Process

Specifications for Artwork

Vector format:

When possible please send vector files in Adobe Illustrator format. Vector files are scalable without loss of detail when scaling. If vector files cannot be supplied and redrawing is required on any or all of the components, another day needs to be added to the production time.

4 – Color Process specifications:

Figure 1 - Line Thickness 

Images:

  • Artwork must be @ 100% (final size) or larger.
  • Must be @ 300dpi or higher.(If the artwork is smaller than the imprint area, then the dpi needs to be @ 600dpi.)
  • There is no accurate way to redraw 4 color process images and we cannot redraw photos.
  • * Note: Increasing the size of the image will decrease the dpi of that image.

Fonts:

  • All fonts used in the design must be converted to curves, outlined or rasterized. (This is to prevent any font related issues.)

Minimum text / line thickness:

  • See Fig 1.
  • The ideal line thickness is 3 pts for opacity. All printable areas within the artwork should be a minimum of 3 pts thick (.0417″).
  • * Note: Areas less than 3pts. will print, but might not be opaque enough, except white. Ideally, white will be opaque as small as 1pt. (.0139″). Anything less than 1 pt will not print.

Colors:

  • Colors should be CMYK. Not all RGB colors can be rendered in CMYK. Therefore, you can make any necessary adjustments before sending your file.
  • Blues need to have a difference of 30% or more between Cyan and Magenta. If not, they will print purple.
  • Grays should be created from black or they may produce undesired results if CMYK.

Soft edge / Transparency / Overprint:

  • Design needs to be a solid shape without soft edges, transparencies or overprints.

Spot Color specifications:

Figure 2 - Line Thickness

Fonts:

  • All fonts used in the design must be converted to curves or outlines. (This is to prevent any font related issues.)

Minimum text / line thickness:

  • See Fig. 2
  • The ideal line thickness is 1 pt. All printable areas within the artwork should be a minimum of 1pt thick (.0139″)
  • * Note: Areas less than 1 pt. will not print.

Colors:

  • All colors must be a spot color and designated as such.
  • If the file contains a combination of images that are CMYK or RGB and have spot colors, the job will be done as a 4-Color Process. See our 4-Color Process specifications.

Soft edge / Transparency / Overprint:

  • Design needs to be a solid shape without soft edges, transparencies or overprints.